sinfoera.com – MCQs, Mock Tests | Unix/Lunux UNIX SYSTEM Mcq

1 In UNIX, which of the following command is used to set the task priority ?

A init B nice C kill D PS

✅ Correct Answer: 2

2 Which of the following flags are set when â€˜JMPâ€™ instruction is executed ?

A SF and CF B AF and CF C All flags D No flag is set

✅ Correct Answer: 4

3 Everything below the system call interface and above the physical hardware is known as ______.

A Kernel B Bus C Shell D Stub

✅ Correct Answer: 1

4 Linux operating system uses

A Affinity Scheduling B Fair Preemptive Scheduling C Hand Shaking D Highest Penalty Ratio Next

✅ Correct Answer: 2

5 In Unix, how do you check that two given strings a and b are equal?

A test $a -eq $b B test $a -equal $b C test $a = $b D both a and c

✅ Correct Answer: 4

6 The directory structure used in Unix file system is called

A Hierarchical directory B Tree structured directory C Directed acyclic graph D Graph structured directory

✅ Correct Answer: 1

7 Which statement is not true about process 0 in the Unix operating system?

A Process 0 is called init process B Process 0 is not created by fork system call C After forking process 1, process O becomes swapper process D Process 0 is a special process created when system boots

✅ Correct Answer: 1

8 Which or the following commands would return process_id of sleep command?

A Sleep 1 and echo $? B Sleep 1 and echo # C Sleep 1 and echo $* D Sleep 1 and echo $!

✅ Correct Answer: 2

9 What does the following command do ? grep âˆ’ vn "abc" x

A It will print all of the lines in the file x that match the search string "abc" B It will print all of the lines in file x that do not match the search string "abc" C It will print total no of the lines in file x that match the search string "abc" D It will print the specific line numbers of file x in which there is a match for the string "abc"

✅ Correct Answer: 1

10 The Unix Kernel maintains two key data structures related to processes, the progress table and the user structure. Which of following information is not the part of user

A File descriptor table B System call state C Scheduling parameters D Kernel stack

✅ Correct Answer: 3

11 A Unix file may be of the type :

A Regular file B Directory file C Device file D Any one of the above

✅ Correct Answer: 4

12 A Unix file may be of the type :

A Regular file B Directory file C Device file D Any one of the above

✅ Correct Answer: 4

13 12. Match the following for Unix system calls: List â€“ I List â€“ II (a) exec (i) Creates a new process (b) brk (ii) Invokes another program overlaying memory space with a copy of an executable file (c) wait (iii) To increase or decrease the size of data region (d) fork (iv) A process synchronizes with termination of child process code: a b c d

A (ii) (iii) (iv) (i) B (iii) (ii) (iv) (i) C (iv) (iii) (ii) (i) D (iv) (iii) (i) (ii)

✅ Correct Answer: 1

14 WOW32 is a :

A Win 32 API library for creating processes and threads B Special kind of file system to the NT name space C Kernel - mode objects accessible through Win 32 API D Special execution environment used to run 16 bit Windows applications on 32 - bit machines

✅ Correct Answer: 4

15 The Unix command : $ vi file1 file2

A Edits file1 and stores the contents of file1 in file2 B Both files i.e. file1 and file2 can be edited using 'ex' command to travel between the files C Both files can be edited using 'mv' command to move between the files D Edits file1 first, saves it and then edits file2

✅ Correct Answer: 2

16 _______ maintains the list of free disk blocks in the Unix file system.

A I-node B Boot block C Super block D File allocation table

✅ Correct Answer: 3

17 A part of Windows 2000 operating system that is not portable is

A Device Management B Virtual Memory Management C Processor Management D User Interface

✅ Correct Answer: 2

18 Match the following with reference to Unix shell scripts : List-I List-II a. $? i. File name of the current script b. $# ii. List of arguments c. $0 iii. The number of arguments d. $* iv. Exit status of last command Codes: a b c d

A iii ii i iv B ii iii i iv C iv iii i ii D i iii i iv

✅ Correct Answer: 3

19 The output generated by the LINUX command : $ seq 1 2 10 will be

A 1 2 10 B 1 2 3 4 5 6 7 8 9 10 C 1 3 5 7 9 D 1 5 10

✅ Correct Answer: 3

20 In UNIX, ______________ creates three subdirectories: 'PIS' and two subdirectories 'progs' and data from just created subdirectory 'PIS'.

A mdkir PIS/progs PIS/data PIS B mkdir PIS progs data C mkdir PIS PIS/progs PIS/data D mkdir PIS/progs data

✅ Correct Answer: 3

21 Which statement is not correct about â€œinitâ€ process in Unix?

A It is generally the parent of the login shell. B It has PID 1. C It is the first process in the system. D Init forks and execs a â€˜gettyâ€™ process at every port connected to a terminal.

✅ Correct Answer: 3

22 Unix command to change the case of first three lines of file â€œshortlistâ€ from lower to upper

A $ tr â€˜[a-z]â€™ â€˜[A-Z]â€™ shortlist | head-3 B $ head-3 shortlist | tr â€˜[a-z]â€™ â€˜[A-Z]â€™ C $ tr head-3 shortlist â€˜[A-Z]â€™ â€˜[a-z]â€™ D $ tr shortlist head-3 â€˜[a-z]â€™ â€˜[A-Z]â€™

✅ Correct Answer: 4

23 Match the following vi commands in Unix: List-I List-II a. :w i. saves the file and quits editing mode b. :x ii. escapes unix shell c. :q iii. saves file and remains in editing mode d. :sh iv. quits editing mode and no changes are saved to the file Codes: a b c d

A ii iii i iv B iv iii ii i C iii iv i ii D iii i iv ii

✅ Correct Answer: 4

24 The Unix Operating System Kernel maintains two key data structures related to processes, the process table and the user structure. Now, consider the following two statements: I. The process table is resident all the time and contain information needed for all processes, even those that are not currently in memory. II. The user structure is swapped or paged out when its associated process is not in memory, in order not to waste memory on information that is not needed. Which of the following options is correct with reference to above statements ?

A Only (I) is correct B Only (II) is correct C Both (I) and (II) are correct D Both (I) and (II) are wrong

✅ Correct Answer: 3

25 Consider the following operations to be performed in Unix: â€œThe pipe sorts all files in the current directory modified in the month of â€œJuneâ€ by order of size and prints them to the terminal screen. The sort option skips ten fields then sorts the lines in numeric order.â€ Which of the following Unix command will perform above set of operations?

✅ Correct Answer: 1

26 Which of the following statement(s) is/are True regarding â€˜niceâ€™ command of UNIX? I. It is used to set or change the priority of a process. II. A processâ€™s nice value can be set at the time of creation. III. â€˜niceâ€™ takes a command line as an argument.

A I, II only B II, III only C I, II, III D I, III only

✅ Correct Answer: 3

27 In UNIX, processes that have finished execution but have not yet had their status collected are known as ................

A Sleeping processes B Stopped Processes C Zombie Processes D Orphan Processes

✅ Correct Answer: 3

28 Which of the following information about the UNIX file system is not correct?

A Super block contains the number of i-nodes, the number of disk blocks, and the start of the list of free disk blocks. B An i-node contains accounting information as well as enough information to locate all the disk blocks that holds the fileâ€™s data. C Each i-node is 256-bytes long D All the files and directories are stored in data blocks

✅ Correct Answer: 3

29 Which of the following option with reference to UNIX operating system is not correct?

A INT signal is sent by the terminal driver when one types < Control-C > and it is a request to terminate the current operation. B TERM is a request to terminate execution completely. The receiving process will clean up its state and exit. C QUIT is similar to TERM, except that it defaults to producing a core dump if not caught. D KILL is a blockable signal.

✅ Correct Answer: 4

30 What is the function of following UNIX command? WC â€“ l < a >b&

A It runs the word count program to count the number of lines in its input, a, writing the result to b, as a foreground process. B It runs the word count program to count the number of lines in its input, a, writing the result to b, but does it in the background. C It counts the errors during the execution of a process, a, and puts the result in process b. D It copies the â€˜ l â€™ numbers of lines of program from file, a, and stores in file b.

✅ Correct Answer: 2

31 Which of the following statement is not correct with reference to cron daemon in UNIX O.S?

A The cron daemon is the standard tool for running commands on a pre-determined schedule. B It starts when the system boots and runs as long as the system is up. C Cron reads configuration files that contain list of command lines and the times at which they invoked. D Cron reads configuration files that contain list of command lines and the times at which they invoked.

✅ Correct Answer: 4

32 In Unix, files can be protected by assigning each one a 9-bit mode called rights bits. Now, consider the following two statements: I. A mode of 641 (octal) means that the owner can read and write the file, other members of the ownerâ€™s group can read it, and users can execute only. Which of the following options is correct with reference to above statements?

A Only I is correct B Only II is correct C Both I and II are correct D Both I and II are incorrect

✅ Correct Answer: 3

33 In Unix, the login prompt can be changed by changing the contents of the file ...............

A contrab B init C gettydefs D inittab

✅ Correct Answer: 3

34 A unix file system has 1-KB blocks and 4-byte disk addresses. What is the maximum file size if i-nodes contain 10 direct entries and one single, double and triple indirect entry each?

A 32 GB B 64 GB C 16 GB D 1 GB

✅ Correct Answer: 3

35 In Unix operating system, special files are used to :

A buffer data received in its input from where a process reads B provide a mechanism to map physical device to file names C store list of file names plus pointers associated with i-nodes D store information entered by a user application program or utility program

✅ Correct Answer: 2

36 Match the following in Unix file system : List - I List - II (a) Boot block (i) Information about file system (b) Super block (ii) Information about file (c) Inode table (iii) Storage space (d) Data block (iv) Code for making OS ready Codes : (a) (b) (c) (d)

A (iv) (i) (ii) (iii) b. B (i) (iii) (ii) (iv) c. C (iii) (i) (ii) (iv) D (iv) (ii) (i) (iii)

✅ Correct Answer: 1

37 In Unix, the command to enable execution permission for file â€œmylifeâ€ by all is ................

A Chmod ugo+X myfile B Chmod a+X myfile C Chmod +X myfile D All of the above

✅ Correct Answer: 4

38 Which of the following out commands will output "onetwothree"?

A for val; do echo-n $val; done < one two three B for one two three; do echo-n-; done C for n in one two three; do echo-n $n; done D for n in one two three {echo-n $n}

✅ Correct Answer: 3

39 Assume that an implementation of Unix operating system uses i-nodes to keep track of data blocks allocated to a file. It supports 12 direct block addresses, one indirect block address and one double indirect block address. The file system has 256 bytes block size and 2 bytes for disk block address. The maximum possible size of a file in this system is

A 16 MB B 16 KB C 70 KB D None of the above

✅ Correct Answer: 4

40 Which of the following set of Unix commands will always display â€œWELCOMEâ€ ?

A export title=WELCOME; Echo $title B title = WELCOME; export $ title ; sh â€“c â€œecho $titleâ€ C title = WELCOME; export title ; sh â€“c â€œecho $titleâ€ D title = WELCOME; echo $title

✅ Correct Answer: 3

41 Which of the following shell scripts will produce the output â€œmy first scriptâ€ ?

A for i in my first script { echo â€“i $i} B for my first script; do echo â€“n; done C for i in my first script; do echo â€“i $i; done D for n in my first script; do echo â€“i $i; done

✅ Correct Answer: 3

42 Which of the following statements is not true for UNIX Operating System ?

A Major strength of UNIX Operating System is its open standards which enabled large number of organizations ranging from academicia to industries to participate in its development. B UNIX kernel uses modules with well specified interfaces and provides advantages like simplified testing and maintenance of kernel. It has better extensibility as the kernel is not monolithic. C UNIX is kernel based operating system with two main components viz. process management subsystem and file management subsystem. D All devices are represented as files which simplify the management of I/O devices and files. The directories structure used is directed acyclic graph.

✅ Correct Answer: 2

43 Consider the following UNIX command: sort < in > temp; head -30 < temp; rm temp Which of the following functions shall be performed by this command?

A Sort, taking the input from "temp", prints 30 lines from temp and delete the file temp B Sort the file "temp", removes 30 lines from temp and delete the file temp C Sort, taking the input from "in" and writing the output to "temp" then prints 30 lines from temp on terminal. Finally "temp" is removed D Sort, taking the input from 'temp" and then prints 30 lines from "temp" on terminal. Finally "temp" is removed

✅ Correct Answer: 3

44 The mv command changes

A the inode B the inode-number C the directory entry D both the directory entry and the inode

✅ Correct Answer: 3

45 A UNIX file system has 1 KB block size and 4-byte disk addresses. What is the maximum file size if the inode contains ten direct block entries, one single indirect block entry, one double indirect block entry and one triple indirect block entry?

A 30 GB B 64 GB C 16 GB D 1 GB

✅ Correct Answer: 3

46 A user level process in Unix traps the signal sent on a Ctrl + C input and has a signal handling routine that saves appropriate files before terminating the process. When a Ctrl + C input is given to this process, what is the mode in which the signal handling routine executes ?

A User mode B Kernel mode C Superuser mode D Privileged mode

✅ Correct Answer: 2

47 Which one of the following options is not a shell in UNIX system?

A Bourne Shell B C Shell C Net Shell D Korn Shell

✅ Correct Answer: 3

48 Which command allows you to view your file 24 lines at a time ?

A More B Cat C Pg. D None of the above

✅ Correct Answer: 1

49 The Unix command used to find out the number of characters in a file is

A nc B wc C chcnt D lc

✅ Correct Answer: 2

50 Find the odd man out:

A tail B cut C wart D sed

✅ Correct Answer: 3

51 Which of the following changes permission to deny write permission to group and others?

A Chmod go-w filex B Chmod go w filex C Chmod go=w filex D None of the above

✅ Correct Answer: 1

52 Which of the following OS treats hardware as a file system?

A UNIX B DOS C Windows NT D None of the above

✅ Correct Answer: 1

53 An example of a memory management system call in UNIX is:

A fork B mmap C sigaction D execve

✅ Correct Answer: 2

54 An example of a directory found in most UNIX system is:

A usr B waitpid C brk D unmap

✅ Correct Answer: 1

55 The â€œniceâ€ command is used in Unix:

A to decrease the priority of a process B to increase the priority of a process C to get the highest priority D both a and b

✅ Correct Answer: 4

56 Which of the following is not an Unix Command ?

A Whoami B wc C is D put

✅ Correct Answer: 4

57 A system call in Linux operating system to create a new child process, which is a copy of the parent process:

A access B fork C flock D exec

✅ Correct Answer: 2

58 The environment variable in Linux, that contain a list of directories the shell automatically recognizes.

A $PATH B $ENV C $USER D $GREP

✅ Correct Answer: 1

59 In Linux, the subdirectory that contains system configuration files including user passwords:

A /boot B /usr C /etc D /proc

✅ Correct Answer: 3

60 Linux partitions are created using the file system:

A FAT B FAT32 C EXT3 D NTFS

✅ Correct Answer: 3

61 Which UNIX/Linux command is used to make all files and sub-directories in the directory â€œprogsâ€ executable by all users?

A chmod âˆ’R a+x progs B chmod âˆ’R 222 progs C chmod âˆ’X a+x progs D chmod âˆ’X 222 progs

✅ Correct Answer: 1

62 Consider the following statements : (a) UNIX provides three types of permissions * Read * Write * Execute (b) UNIX provides three sets of permissions * permission for owner * permission for group * permission for others Which of the above statement/s is/are true?

A Only (a) B Only (b) C Both (a) and (b) D Neither (a) nor (b)

✅ Correct Answer: 3

63 Match the following WINDOWS system calls and UNIX system calls with reference to process control and File manipulation. Windows (a) Create - process () (b) WaitForSingleObject () (c) CreateFile () (d) CloseHandle () UNIX (i) Open () (ii) Close () (iii) Fork () (iv) Wait () Code : (a) (b) (c) (d)

A (iii) (iv) (i) (ii) B (iv) (iii) (i) (ii) C (iv) (iii) (ii) (i) D (iii) (iv) (ii) (i)

✅ Correct Answer: 1

Unix/Lunux — Learn

UNIX SYSTEM Mcq